研究成果
Research
Corking and Uncorking a Catalytic Yolk-Shell Nanoreactor: Stable Gold Catalyst in Hollow Silica Nanosphere
Chen-Han Lin, Xiaoyan Liu, Si-Han Wu, Kao-Hsiang Liu, and Chung-Yuan Mou*

J. Phys. Chem. Lett., 2011, 2(23), pp 2984–2988.

10.1021/jz201336h
Silica templating of a water-in-oil (w/o) microemulsion system containing HAuCl4 results in gold nanoparticles of sizes around 3 nm confined in hollow silica nanospheres. The size of the gold nanocatalyst is stable to high temperature calcination. Its catalytic activity toward CO oxidation is very stable after repeated use and long-time storage. The reaction can be controlled by a corking design based on capillary condensation of water vapor for corking the mesopores on the shell. At higher temperature or low water vapor pressure, pores open after vapor evaporation and water promotes the CO oxidation. The corking and uncorking mechanism of the yolk-shell type nanoreactor is reversible.
Strong Metal–Support Interactions between Gold Nanoparticles and ZnO Nanorods in CO Oxidation
Xiaoyan Liu, Ming-Han Liu, Yi-Chia Luo, Chung-Yuan Mou*, Shawn D. Lin,  Hongkui Cheng, Jin-Ming Chen, Jyh-Fu Lee, and Tien-Sung Lin

J. Am. Chem. Soc., 2012, 134 (24), pp 10251–10258

10.1021/ja3033235
The catalytic performances of supported gold nanoparticles depend critically on the nature of support. Here, we report the first evidence of strong metal–support interactions (SMSI) between gold nanoparticles and ZnO nanorods based on results of structural and spectroscopic characterization. The catalyst shows encapsulation of gold nanoparticles by ZnO and the electron transfer between gold and the support. Detailed characterizations of the interaction between Au nanoparticles and ZnO were done with transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), electron paramagnetic resonance (EPR), and FTIR study of adsorbed CO. The significance of the SMSI effect is further investigated by probing the efficiency of CO oxidation over the Au/ZnO-nanorod. In contrast to the classical reductive SMSI in the TiO2 supported group VIII metals which appears after high temperature reduction in H2 with electron transfer from the support to metals, the oxidative SMSI in Au/ZnO-nanorod system gives oxygen-induced burial and electron transfer from gold to support. In CO oxidation, we found that the oxidative SMSI state is associated with positively charged gold nanoparticles with strong effect on its catalytic activity before and after encapsulation. The oxidative SMSI can be reversed by hydrogen treatment to induce AuZn alloy formation, de-encapsulation, and electron transfer from support to Au. Our discovery of the SMSI effects in Au/ZnO nanorods gives new understandings of the interaction between gold and support and provides new way to control the interaction between gold and the support as well as catalytic activity.
A New Strategy for Intracellular Delivery of Enzyme Using Mesoporous Silica Nanoparticles: Superoxide Dismutase
Yi-Ping Chen, Chien-Tsu Chen, Yann Hung, Chih-Ming Chou, Tsang-Pai Liu, Ming-Ren Liang, Chao-Tsen Chen†, and Chung-Yuan Mou*

J. Am. Chem. Soc., 2013, 135 (4), pp 1516–1523

10.1021/ja3105208
We developed mesoporous silica nanoparticle (MSN) as a multifunctional vehicle for enzyme delivery. Enhanced transmembrane delivery of a superoxide dismutase (SOD) enzyme embedded in MSN was demonstrated. Conjugation of the cell-penetrating peptide derived from the human immunodeficiency virus 1 (HIV) transactivator protein (TAT) to mesoporous silica nanoparticle is shown to be an effective way to enhance transmembrane delivery of nanoparticles for intracellular and molecular therapy. Cu,Zn-superoxide dismutase (SOD) is a key antioxidant enzyme that detoxifies intracellular reactive oxygen species, ROS, thereby protecting cells from oxidative damage. In this study, we fused a human Cu,Zn-SOD gene with TAT in a bacterial expression vector to produce a genetic in-frame His-tagged TAT-SOD fusion protein. The His-tagged TAT-SOD fusion protein was expressed in E. coli using IPTG induction and purified using FMSN-Ni-NTA. The purified TAT-SOD was conjugated to FITC-MSN forming FMSN-TAT-SOD. The effectiveness of FMSN-TAT-SOD as an agent against ROS was investigated, which included the level of ROS and apoptosis after free radicals induction and functional recovery after ROS damage. Confocal microscopy on live unfixed cells and flow cytometry analysis showed characteristic nonendosomal distribution of FMSN-TAT-SOD. Results suggested that FMSN-TAT-SOD may provide a strategy for the therapeutic delivery of antioxidant enzymes that protect cells from ROS damage.
Nonviral Cell Labeling and Differentiation Agent for Induced Pluripotent Stem Cells Based on Mesoporous Silica Nanoparticles
Wei Chen, Ping-Hsing Tsai, Yann Hung, Shih-Hwa Chiou, and Chung-Yuan Mou

ACS Nano, 2013, 7 (10), pp 8423–8440

10.1021/nn401418n
The generation of induced pluripotent stem cells (iPSCs) is an innovative personalized-regenerative technology, which can transform own-self somatic cells into embryonic stem (ES)-like cells, which have the potential to differentiate into all cell types of three dermal lineages. However, how to quickly, efficiently, and safely produce specific-lineage differentiation from pluripotent-state cells and iPSCs is still an open question. The objective of the present study was to develop a platform of a nonviral gene delivery system of mesoporous silica nanoparticles (MSNs) to rapidly generate iPSC-derived definitive-lineage cells, including endodermal-differentiated cells. We also evaluated the feasibility and efficiency of FITC-conjugated MSNs (FMSNs) for labeling of iPSCs and utilized the multifunctional properties of FMSNs for a suitable carrier for biomolecule delivery. We showed that FMSNs of various surface charges could be efficiently internalized by iPSCs without causing cytotoxicity. The levels of reactive oxygen species and pluripotent status, including in vitro stemness signatures and in vivo teratoma formation, remained unaltered. Notably, positive-charged FMSN enhanced cellular uptake efficiency and retention time. Moreover, when using positive-charged FMSN to deliver hepatocyte nuclear factor 3β (HNF3β) plasmid DNA (pDNA), the treated iPSCs exhibited significantly improved definitive endoderm formation and further quickly differentiated into hepatocyte-like cells with mature functions (low-density lipoprotein uptake and glycogen storage) within 2 weeks in vitro. Double delivery of pHNF3β further improved mRNA expression levels of liver-specific genes. These findings reveal the multiple advantages of FMSNs to serve as ideal vectors not only for stem cell labeling but also for safe gene delivery to promote the production of hepatocyte-like cells from iPSCs.
Synthesis of mesoporous silica nanoparticles
Si-Han Wu,a   Chung-Yuan Moua and  Hong-Ping Lin*b 

Chem. Soc. Rev., 2013, 42, 3862-3875

10.1039/C3CS35405A
Good control of the morphology, particle size, uniformity and dispersity of mesoporous silica nanoparticles (MSNs) is of increasing importance to their use in catalyst, adsorption, polymer filler, optical devices, bio-imaging, drug delivery, and biomedical applications. This review discusses different synthesis methodologies to prepare well-dispersed MSNs and hollow silica nanoparticles (HSNs) with tunable dimensions ranging from a few to hundreds of nanometers of different mesostructures. The methods include fast self-assembly, soft and hard templating, a modified Stöber method, dissolving–reconstruction and modified aerogel approaches. In practical applications, the MSNs prepared by these methods demonstrate good potential for use in high-performance catalysis, antireflection coating, transparent polymer–MSNs nanocomposites, drug-release and theranostic systems.
Ntracellular Implantation of Enzymes in Hollow Silica Nanospheres for Protein Therapy: Cascade System of Superoxide Dismutase and Catalase
Feng-Peng Chang, Yi-Ping Chen, and Chung-Yuan Mou

Small 2014, 10(22), 4785-4795

10.1002/smll.201401559
An approach for enzyme therapeutics is elaborated with cell-implanted nanoreactors that are based on multiple enzymes encapsulated in hollow silica nanospheres (HSNs). The synthesis of HSNs is carried out by silica sol–gel templating of water-in-oil microemulsions so that polyethyleneimine (PEI) modified enzymes in aqueous phase are encapsulated inside the HSNs. PEI-grafted superoxide dismutase (PEI-SOD) and catalase (PEI-CAT) encapsulated in HSNs are prepared with quantitative control of the enzyme loadings. Excellent activities of superoxide dismutation by PEI-SOD@HSN are found and transformation of H2O2 to water by PEI-CAT@HSN. When PEI-SOD and PEI-CAT are co-encapsulated, cascade transformation of superoxide through hydrogen peroxide to water was facile. Substantial fractions of HSNs exhibit endosome escape to cytosol after their delivery to cells. The production of downstream reactive oxygen species (ROS) and COX-2/p-p38 expression show that co-encapsulated SOD/CAT inside the HSNs renders the highest cell protection against the toxicant N,N′-dimethyl-4,4′-bipyridinium dichloride (paraquat). The rapid cell uptake and strong detoxification effect on superoxide radicals by the SOD/CAT-encapsulated hollow mesoporous silica nanoparticles demonstrate the general concept of implanting catalytic nanoreactors in biological cells with designed functions.
Formation of hollow silica nanospheres by reverse microemulsion
Cheng-Han Lin,a   Jen-Hsuan Chang,a   Yi-Qi Yeh,b  Si-Han Wu,a   Yi-Hsin Liua and  Chung-Yuan Mou*a

Nanoscale, 2015,7, 9614-9626

10.1039/C5NR01395J
Uniform hollow silica nanospheres (HSNs) synthesized with reverse microemulsion have great application potential as nanoreactors because enzymes or nanocatalysts can be easily encapsulated de novo in synthesis. Water-in-oil (w/o) reverse microemulsions comprising the polymeric surfactant polyoxyethylene (5) isooctylphenyl ether (Igepal CA-520), ammonia and water in a continuous oil phase (alkanes) coalesce into size-tunable silica nanoparticles via diffusion aggregation after the introduction of silica precursors. Here, we elucidate in detail the growth mechanism for silica nanoparticles via nucleation of ammonium-catalyzed silica oligomers from tetraethylorthosilicate (TEOS) and nanoporous aminopropyltrimethoxy silane (APTS) in the reverse microemulsion system. The formation pathway was studied in situ with small-angle X-ray scattering (SAXS). We find a four-stage process showing a sigmoidal growth behavior in time with a crossover from the induction period, early nucleation stage, coalescence growth and a final slowing down of growth. Various characterizations (TEM, N2 isotherm, dynamic light scattering, zeta potential, NMR, elemental analysis) reveal the diameters, scattering length density (SLD), mesoporosity, surface potentials and chemical compositions of the HSNs. Oil phases of alkanes with different alkyl chains are systematically employed to tune the sizes of HSNs by varying oil molar volumes, co-solvent amounts or surfactant mixture ratios. Silica condensation is incomplete in the core region, with the silica source of TEOS and APTS leading to the hollow silica nanosphere after etching with warm water.
A General Method for Growing Large Area Mesoporous Silica Thin Films on Flat Substrates with Perpendicular Nanochannels
Kun-Che Kao, Cheng-Han Lin, Tzu-Ying Chen, Yi-Hsin Liu*, and Chung-Yuan Mou*†

J. Am. Chem. Soc., 2015, 137 (11), pp 3779–3782

10.1021/jacs.5b01180
Here we introduce a new synthetic approach to grow mesoporous silica thin films with vertical mesochannels on centimeter-sized substrates via an oil-induced co-assembly process. Adding an oil, i.e., decane, into a CTAB–EtOH–TEOS ammonia solution leads to thin-film formation of mesoporous silica of controlled thickness between 20 and 100 nm with vertical mesochannels on various surfaces. The vertical mesoporous channels were evidenced by grazing incidence small-angle X-ray scattering (GISAXS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) characterizations. Decane played two roles: (a) as a pore expansion agent (up to 5.7 ± 0.5 nm) and (b) inducing vertically oriented hexagonal mesophases of micelle–silica composite. The production of periodic and vertical nanochannels is very robust, over many different substrate surfaces (from silicon to polystyrene), various silica precursors (TEOS, fumed silica, or zeolite seed), and many oils (decane, petroleum ether, or ethyl acetate). This wide robustness in the formation of vertical nanophases is attributed to a unique mechanism of confined synthesis of surfactant–silicate between two identical thin layers of oils on a substrate.
Heterogeneous formulation of the tricopper complex for efficient catalytic conversion of methane into methanol at ambient temperature and pressure
Chih-Cheng Liu,ab   Chung-Yuan Mou,a  Steve S.-F. Yub and   Sunney I. Chan*ab

Energy Environ. Sci., 2016,9, 1361-1374

10.1039/C5EE03372A
The development of a heterogeneous catalyst capable for efficient selective conversion of methane into methanol with multiple turnovers under ambient conditions is reported here. The catalyst is assembled by immobilizing into mesoporous silica nanoparticles the tricopper complex [CuICuICuI(7-N-Etppz)]1+, where 7-N-Etppz stands for the organic ligand 3,3′-(1,4-diazepane-1,4-diyl)bis[1-(4-ethylpiperazine-1-yl)propan-2-ol]. This tricopper cluster complex has been previously shown to mediate efficient methane oxidation without over-oxidation in homogeneous solution when the catalytic turnover is driven by hydrogen peroxide in acetonitrile. The turnover mechanism of the catalyst is similar between the two formulations. However, the heterogeneous formulation exhibits dramatically higher catalytic efficiencies and turnover numbers, with commensurate improvements in chemical yields, offering the most proficient catalyst for the selective conversion of methane into methanol at room temperature developed to date. To explain the efficient methane oxidation, the over-solubility of nonpolar gases, such as methane, in liquids confined in nanoporous solids is evoked. The much higher solubility of methane within the pores of the mesoporous silica nanoparticles, as compared to the bulk solubility, led to very efficient turnover of the concentrated confined methane. This success underscores the advantages of using nanoparticles to support chemical catalysts for this difficult chemical transformation under these conditions.
Approach To Deliver Two Antioxidant Enzymes with Mesoporous Silica Nanoparticles into Cells
Yu-Hsuan Lin, Yi-Ping Chen, Tsang-Pai Liu, Fan-Ching Chien, Chih-Ming Chou, Chien-Tsu Chen, and Chung-Yuan Mou*†

ACS Appl. Mater. Interfaces, 2016, 8 (28), pp 17944–17954

10.1021/acsami.6b05834
Reactive oxygen species (ROS) are important factors in many clinical diseases. However, direct delivery of antioxidant enzymes into cells is difficult due to poor cell uptake. A proper design of delivery of enzymes by nanoparticles is very desirable for therapeutic purposes. To overcome the cell barrier problem, a designed mesoporous silica nanoparticle (MSN) system with attached TAT-fusion denatured enzyme for enhancing cell membrane penetration has been developed. Simultaneous delivery of two up–downstream antioxidant enzymes, superoxide dismutase (SOD) and glutathione peroxidase(GPx), reveals synergistic efficiency of ROS scavenging, compared to single antioxidant enzyme delivery. TAT peptide conjugation provided a facile nonendocytosis cell uptake and escape from endosome while moving and aggregating along the cytoskeleton that would allow them to be close to each other at the same time, resulting in the cellular antioxidation cascade reaction. The two-enzyme delivery shows a significant synergistic effect for protecting cells against ROS-induced cell damage and cell cycle arrest. The nanocarrier strategy for enzyme delivery demonstrates that intracellular anti-ROS cascade reactions could be regulated by multifunctional MSNs carrying image fluorophore and relevant antioxidation enzymes.